Magtrol  
Motor Test Equipment
Dynamometers
Engine
-Specifications
 
 
PRODUCTS
SERVICES
SUPPORT
DATA SHEETS
COMPANY
CONTACT
SITE MAP
 

Engine Dynamometer Specifications

 
For complete technical specifications, including dimensions and power curves, download the data sheet. Conversion Calculators
 
*Please contact sales regarding any dynamometer application requiring the use of a controller other than the DSP 6001 or DSP 7000 Series*
MODEL Torque
Measure
Unit Code
Torque
Range
Maximum
Speed**
Maximum Power Blower Model View Drawing Solid Model
5 Minute Continuous*
rpm hp W hp W PDF STEP
ED-715 5N*** 6.20 N·m 25,000 5 3400 4 3000 BL-001
ED-815 5N*** 28.0 N·m 12,000 10 7000 8 6000 BL-002 N/A
*NOTE: Operating at the continuous power rating for periods of up to 4 hours is acceptable.  However, operating for extended periods at high temperatures will result in premature component and bearing failure. Limiting the length of the cycle and the component temperatures will guard against premature failure. Where continuous duty is desired for longer time intervals, component temperatures should be maintained less than 100°C; monitoring the outside brake surface temperature is a sufficient reference.
**
The maximum speed will depend on what type of keyway (if any) is used on the shaft. Unless specified, the dynamometer shaft will be made without a keyway.
*** 5 Volt Output
 
**Click Here for 6N (English), 7N (Metric) and 8N (SI) Specifications**
 
Magtrol, Inc (USA): 716-668-5555 • magtrol@magtrol.com ~ Magtrol SA (Switzerland): 41 (0)26 407 3000 • magtrol@magtrol.ch
Magtrol Contact Us English French German Chinese India Russian Motor Test Equipment Torque Transducers Load-Force-Weight Systems Brakes and Clutches Displacement Rotary Transmitters